Products About us Innovation Sustainability Dealers 3D configurator Contact
NLEN

AKAB TRILINE

The insulated door blank with routed grooves: the look of a stacked-plank door, without the joints of a stacked-plank door.

Routed groovesTricoya® 4.9 mmNo glazing bead outside
Stacked-plank look in one plane

The look of a stacked-plank door,
without the joints

The AKAB TriLine is an insulated door blank with 4.9 mm Tricoya® facings on both sides and okoumé edge timber. The grooves are routed into the continuous facing — not formed by placing separate rails against each other.

Beneath each groove 1.9 mm of Tricoya remains. So there is no joint running through to the core, and the transition to the facing is chamfered rather than square, so rainwater can run out of the groove.

This gives the TriLine the same dimensional stability and insulation value as the flat TriTop — 0.91 W/m²K — with the look of a stacked-plank door.

  • Tricoya® facings 4.9 mm — both sides, dimensionally stable and moisture resistant
  • Grooves 3 mm deep — routed, flat bottom, 1.9 mm remains
  • Okoumé edge timber, insulated core — 0.91 W/m²K
  • No glazing bead outside — the outer facing itself frames the glass
  • Sill height as required
4.9mm
Tricoya facing
3mm
Depth of the groove
1.9mm
Remains beneath the groove
0.91W/m²K
Thermal performance
Technical specifications

Build-up — from outside to inside

Tricoya® facing 4.9 mm
Insulated core · okoumé edge timber
Tricoya® facing 4.9 mm

Thicknesses

40mm
54mm

Dimensions

2150 × 950MM (L × W)
2350 × 950MM (L × W)
2350 × 1100MM (L × W)
2500 × 1200MM (L × W)
⚙ Standard dimensions · custom sizes possible
The detailing

What makes the TriLine different

Two details make the difference with a classic stacked-plank door: the way the grooves are created, and the way the glass sits in the opening.

01

The grooves — flat bottom, chamfered transition

The grooves are routed into a continuous facing. Beneath each groove 1.9 mm of Tricoya remains, so there is no joint running through to the core.

routed 3 mm deep flat bottom, 1.9 mm remains Tricoya® facing, 4.9 mm — both sides Insulated core with okoumé edge timber
  • Routed into one continuous board, not built up from separate rails
  • No joint through to the core — 1.9 mm of facing remains
  • Chamfered transition: rainwater runs out of the groove
  • Sill height as required
02

The glazing opening — no glazing bead and no sealant joint outside

The glazing opening is cut all the way through. Around the opening about 16 mm of the outer facing remains; the glass is placed against it from the inside.

OUTSIDE INSIDE ca. 16 mm door cut away here Tricoya® facing Insulated core Glazing bead with stainless steel screws — inside only Double glazing Setting block Sealant and glazing tape, both sides
  • The outer facing itself frames the glass
  • Glazing bead and stainless steel screws are fully on the inside, out of the weather
  • Fewer parts on site, fewer installation steps
  • Nothing on the weather side that can come loose
Supply

Supplied unmachined only

TriLine unmachined
The TriLine is supplied as a flat door blank, without grooves and without a glazing opening. You rout the grooves and cut the glazing opening yourself, in your own program and to your own dimensions and sill height.
!

Please note: AKAB does not rout the grooves or the glazing opening. The TriLine is supplied unmachined only; the detailing above shows how the machining is intended.

Available as standard in 40 and 54 mm with a 4.9 mm Tricoya® facing. A different facing thickness is possible on request.

Interested in the TriLine? Our dealers will be happy to advise you.

Find a dealer →